(as of Jul 25,2022 23:35:44 UTC – Details)
About high-power power supply
If the high-power power supply is suddenly cut off, it will take a while, at least 3 minutes, until the residual power of the large capacitor is discharged before restarting
2000W-2500W Mining Rig Power Supply
Voltage : 110V-230V(also can be used with 240V)
Power: input ≥AC220V，output rated power 2500W，power efficiency 90%, output power 2500W*90%.
input =AC110V, output rated power 2000W， power efficiency 84% , output power 2000W*84%.
PFC Type: active PFC
10 Long power Cables
1 x2000W-2500W Power Supply
1 x Power Cord
【2000W-2500W Mining Power Supply】 Input above AC110V, the output rated power is 2000W, Power efficiency is about 80%; Input above AC220V, the output rated power is 2500W, Power efficiency is about 90%. Please reasonably calculate the consumption of the GPUs, and reserve 300-400W for the motherboard and other cable consumption.
【No Power Cable Extension Required】 8*【(6+2)pin*2】+2*【6pin*3】 interface. The mining power supply will come with 10 long power cables. 3 power cables with a length of 75cm, 5 power cables with a length of 50cm, 2 power cables with a length of 55cm. You can connect 2✖PCIE 6pin to motherboard, and connect 8✖ PCIE（6+2)pin to the GPUs directly.
【Stable and Efficient 】 The Mining power supply can be used at AC110V-240V. Over voltage protection, overloading protection, short circuit protection.
【Note】 The power supply cannot be used for ASIC miners with protocols or software. To make the power supply have a longer life, We recommend to clean the power supply fan frequently.
【ETH Mining Rig Power Supply Packing】 Include 1.2m power cord, cable tie, screw.