Price: $99.00 - $89.00
(as of Jul 26,2022 04:51:50 UTC – Details)
Product Description
34 HDD Mining Rig Frame Open Air 3.5in Hard Disk Drive Test Bench Case
About this item
About this item
accelerating the air convection, enhancing the cooling.
Strong & durable, fully protection to your device.
fit ATX motherboards, up to 34 Hard Disk Drives, and power supplies.
Easy to move, installation and maintenance.and reserved enough space for equipment overhaul.
All mounting positions correspond to specific positioning holes and are easy to install.
Product Description:
Descriptions:
Product size: (length*height*depth) about 505*270*384 mm/19.88*10.63*15.12 inches
Motherboard size: maximum 305*330 mm/12.01*12.99 inches EATX motherboard
Hard disk specifications: upper HDD*24, lower SSD*1
When the main board is an ATX board, the lower layer can support 10 HDDs
When the main board is an EATX board, the lower layer can support 4 HDDs
When using EATX and ultra-long power supply, the lower layer cannot install the hard disk
Support power supply: support ATX power supply, support extended power supply
Fan specifications: front about 12 cm/4.72 inches, fanx4, rear about 12 cm/4.72 inches fan x 4
Product material: bracket about 1.5 mm/0.06 inches, base plate and power supply about 0.8 mm/0.03 inches. The surface is sprayed with sand-grain black
Standard screws: hexagonal column 9PCS, motherboard screw 11PCS, hexagonal screw 120PCS
Product packaging: single packaging about 410*45*535 mm/16.14*1.77*21.06 inches
Product gross weight: about 5 KG
Packing List:
1 x Mining Rack
1 x Fixed Installation Screw Package
1 x Boot Line
(This listing DOES NOT include FAN, HDD, CPU, GPU, PSU, Motherboards, RAMs, or any cables.)
Brand:MININGEEK
Color:Black
Hard Disk Form Factor:3.5 Inches
Cooling Method:Air
Motherboard Compatability:ATX
Item Dimensions LxWxH:19.88 x 10.63 x 15.12 inches
Notes:
1. Please allow 1-5 cm error due to manual measurement and make sure you do not mind before ordering.
2. You will receive the frame disassemble,you need to assemble it by yourself.
How to install the rack：
Step 1: First align the yellow hexagonal column in the accessory package with the hole of the motherboard and
tighten it with pliers, and lock the power supply fixing piece in the accessory package with hexagonal screws.
Power supply fixing piece
Yellow hexagonal column
Bottom plate
Step 2: Install the separately purchased 12cM fan on the U-shaped frame.
Pay attention to the fan’s wind direction to be uniform, and the arrow on the fan indicates the same direction.
Special note: Fans and fan screws are not standard
Step 3: Fix the U-shaped frame on the front and back of the bottom plate. with hexagonal screws
Step 4: Fix the left and right fixing frames on the U-shaped frame with hexagonal screws.
Top disk arrangement mode.
There is a 48mm distance between the hard drive cable and the fan.
First connect the hard drive cable and then lock the hard bracket. After the fan is installed, the cable cannot be directly inserted
Lock the power supply is hexagonal screw, lock the main board is M3 screw.
Secure with long hexagon screws in the direction indicated by the arrow.
Step 5: Fix the power supply and the motherboard on the bottom of the rack.
In-line motherboards are not supported.
Motherboard specifications are supported: EATX (305*330), ATX (305*245)，MATX(245*245), IX(170*170)
Step6：Fix the power supply and mainboard on the chassis bottom plate.
The mainboard cannot be directly inserted.
Step 7：Secure the two hard disk trays to the left and right fasteners.
Step 8：Install the hard disk support into the rack.
Front and rear dual-row 12 fans, exhaust while taking in the air.
ATX power supply
ATX, EATX motherboard maximum 305X330
Front 12cM fan X4, rear 12cM fan X4
Assemble two hard drives in one, with 12 sets
of brackets, each with a spacing of 40mm
The maximum height of the CPU radiator is 12cM, and the
distance between the hard drive cable and the fan is 48MM
When installing the ATX motherboard in 305 245MM, 2 HDDs can be installed here
Dual hard disks are installed in parallel, leaving enough cables at both ends and empty cables. When the power supply does not exceed 20cM.
5 HDDs can be installed here
Professional team design for miner, accelerating the air convection, enhancing the cooling.
The frame was made of high quality material, with the finest craftmanship. Strong & durable, fully protection to your device.
Perfectly fit ATX motherboards, up to 34 Hard Disk Drives, and power supplies.
Easy to move, installation and maintenance.and reserved enough space for equipment overhaul.
All mounting positions correspond to specific positioning holes and are easy to install.
Reviews
There are no reviews yet.