Price: $60.69
(as of Jul 27,2022 22:29:32 UTC – Details)
7inch Capacitive Touch Screen LCD,1024×600, HDMI interface, supports various systems, (Rev 4.1)7inch HDMI LCD (C) Features
7inch IPS screen, 1024×600 hardware resolution, Capacitive touch control, Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free, When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free, Backlight can be turned off to lower power consumption
Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:
Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
BB Black: HDMI cable
PACKAGE CONTENT:
1.7inch HDMI LCD (C) x 1
2.HDMI cable x 1
3.HDMI to Micro HDMI Adapter x 1
4.USB type A plug to micro B plug cable x 1
5.RPi screws pack (4pcs) x 1
6.Quick start sheet x1
Note:
1.If there are some red lines on the edge of the screen,Please adjust the config.txt file by addding [the hdmi_drive=1] into the end of code After that please power off the srceen and put it aside for a few hours to avoid the flickers
2.If there are some ghost pictures,Please adjust the adjustable resistor on the back which we point out in the picture And after the screen can display the desktop, rotate the resistor until it can get the best display of desktop Then please leave the screen for a while,waiting for the ghost to disappear (may take several hours)
(The newest Rev4.1) 7inch HDMI LCD (C), IPS screen, Capacitive Touch Screen ,HDMI interface,1024×600 hardware resolution.HDMI Interface for displaying , USB Interface for touching. Backlight can be turned off to lower power consumption
Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers: When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free;When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
Note:Please set the config.txt file by addding [the hdmi_drive=1] into the end of code if you connect it with raspberry pi. (like manual in picture)Otherwise the LCD could not work properly.
Note:If the LCD work in abnormal states for long time, it may be broken if you don’t set the config.txt file at the beginning.After setting config file,please power off the screen and put it aside for a few hours to avoid the flickers.
Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable
Reviews
There are no reviews yet.