$460.00 - $388.88
(as of Jul 23,2022 17:34:32 UTC – Details)
2.Mining rig troubleshooting :
We have done a quick test before shipment. The rig will be slightly problematic, possibly due to long-term transportation and violent express delivery. When you get the rig, don’t run GPUs immediately. Let’s first test if the rig works.
① Power supply troubleshooting
Check the power supply to see if the fan is turning.
② Motherboard troubleshooting
Connect the keyboard to the computer, Press the Num Lock light on the keyboard. If the light remains off, the motherboard might be at fault. If the Num Lock light on and press again, the Num Lock light off, there is no fault with the motherboard.
③ Install the system
The SSD MSATA we configured is not installed with the system, You can log in to the official website of the corresponding system to download, there is a corresponding installation tutorial.
④ Unable to detect GPU
You need to install the GPU driver.
⑤ Unable to access BIOS
(1) Check motherboard
(2) Replace HDMI cable
【8 GPU Mining Rig Parameter】Inter1(R) Celeron B75 Motherboard: 8X PCI-E spacing 70MM; CPU: Inter1(R) Celeron CPU B75 ; RAM: DDR3 4GB; Hard Disk: 128G SSD MSATA ; Cooling fan: 8 fans 2500-4500 RPM; USB: Rear*5; Network port: Gigabit RJ45 interface RTL8111E; Display interface: HDMI; AC: AV110V-AV260V; OS: Linux OS/windows
【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. The mining case support 8 PCS 3070/6800/6800XT 6900/6900XT GPUs simultaneously. Please reserve about 300W for the motherboard, fan, and other cable consumption. Note: GPUs longer than 32 cm in length are unavailable. We do not recommend using a mix of GPUs, nor do we recommend running a 3060, otherwise the 3060’s hash rate will be halved
【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm.
【4 USB Ports】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 4 USB ports, enough for daily work. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating. Mining rig is a unit requires technology. If you have any technical issue, Please contact us, we are happy to solve your issue.
【Mining rig case】The rig doesn’t come with GPU and PSU. Including: motherboard, CPU, power switch line, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package * 15.